184 lines
8.2 KiB
C++
184 lines
8.2 KiB
C++
/*
|
|
VarSpeedServo.h - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2
|
|
Copyright (c) 2009 Michael Margolis. All right reserved.
|
|
|
|
This library is free software; you can redistribute it and/or
|
|
modify it under the terms of the GNU Lesser General Public
|
|
License as published by the Free Software Foundation; either
|
|
version 2.1 of the License, or (at your option) any later version.
|
|
|
|
This library is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
Lesser General Public License for more details.
|
|
|
|
You should have received a copy of the GNU Lesser General Public
|
|
License along with this library; if not, write to the Free Software
|
|
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*/
|
|
|
|
|
|
/*
|
|
Function slowmove and supporting code added 2010 by Korman. Above limitations apply
|
|
to all added code, except for the official maintainer of the Servo library. If he,
|
|
and only he deems the enhancment a good idea to add to the official Servo library,
|
|
he may add it without the requirement to name the author of the parts original to
|
|
this version of the library.
|
|
*/
|
|
|
|
/*
|
|
Updated 2013 by Philip van Allen (pva),
|
|
-- updated for Arduino 1.0 +
|
|
-- consolidated slowmove into the write command (while keeping slowmove() for compatibility
|
|
with Korman's version)
|
|
-- added wait parameter to allow write command to block until move is complete
|
|
-- added sequence playing ability to asynchronously move the servo through a series of positions, must be called in a loop
|
|
|
|
|
|
A servo is activated by creating an instance of the Servo class passing the desired pin to the attach() method.
|
|
The servos are pulsed in the background using the value most recently written using the write() method
|
|
|
|
Note that analogWrite of PWM on pins associated with the timer are disabled when the first servo is attached.
|
|
Timers are seized as needed in groups of 12 servos - 24 servos use two timers, 48 servos will use four.
|
|
The sequence used to sieze timers is defined in timers.h
|
|
|
|
The methods are:
|
|
|
|
VarSpeedServo - Class for manipulating servo motors connected to Arduino pins.
|
|
|
|
attach(pin ) - Attaches a servo motor to an i/o pin.
|
|
attach(pin, min, max ) - Attaches to a pin setting min and max values in microseconds
|
|
default min is 544, max is 2400
|
|
|
|
write(value) - Sets the servo angle in degrees. (invalid angle that is valid as pulse in microseconds is treated as microseconds)
|
|
write(value, speed) - speed varies the speed of the move to new position 0=full speed, 1-255 slower to faster
|
|
write(value, speed, wait) - wait is a boolean that, if true, causes the function call to block until move is complete
|
|
|
|
writeMicroseconds() - Sets the servo pulse width in microseconds
|
|
read() - Gets the last written servo pulse width as an angle between 0 and 180.
|
|
readMicroseconds() - Gets the last written servo pulse width in microseconds. (was read_us() in first release)
|
|
attached() - Returns true if there is a servo attached.
|
|
detach() - Stops an attached servos from pulsing its i/o pin.
|
|
|
|
slowmove(value, speed) - The same as write(value, speed), retained for compatibility with Korman's version
|
|
|
|
stop() - stops the servo at the current position
|
|
|
|
sequencePlay(sequence, sequencePositions); // play a looping sequence starting at position 0
|
|
sequencePlay(sequence, sequencePositions, loop, startPosition); // play sequence with number of positions, loop if true, start at position
|
|
sequenceStop(); // stop sequence at current position
|
|
|
|
*/
|
|
|
|
#ifndef VarSpeedServo_h
|
|
#define VarSpeedServo_h
|
|
|
|
#include <inttypes.h>
|
|
|
|
/*
|
|
* Defines for 16 bit timers used with Servo library
|
|
*
|
|
* If _useTimerX is defined then TimerX is a 16 bit timer on the curent board
|
|
* timer16_Sequence_t enumerates the sequence that the timers should be allocated
|
|
* _Nbr_16timers indicates how many 16 bit timers are available.
|
|
*
|
|
*/
|
|
|
|
// Say which 16 bit timers can be used and in what order
|
|
#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
|
|
#define _useTimer5
|
|
#define _useTimer1
|
|
#define _useTimer3
|
|
#define _useTimer4
|
|
typedef enum { _timer5, _timer1, _timer3, _timer4, _Nbr_16timers } timer16_Sequence_t ;
|
|
|
|
#elif defined(__AVR_ATmega32U4__)
|
|
#define _useTimer3
|
|
#define _useTimer1
|
|
typedef enum { _timer3, _timer1, _Nbr_16timers } timer16_Sequence_t ;
|
|
|
|
#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
|
|
#define _useTimer3
|
|
#define _useTimer1
|
|
typedef enum { _timer3, _timer1, _Nbr_16timers } timer16_Sequence_t ;
|
|
|
|
#elif defined(__AVR_ATmega128__) ||defined(__AVR_ATmega1281__)||defined(__AVR_ATmega2561__)
|
|
#define _useTimer3
|
|
#define _useTimer1
|
|
typedef enum { _timer3, _timer1, _Nbr_16timers } timer16_Sequence_t ;
|
|
|
|
#else // everything else
|
|
#define _useTimer1
|
|
typedef enum { _timer1, _Nbr_16timers } timer16_Sequence_t ;
|
|
#endif
|
|
|
|
#define VarSpeedServo_VERSION 2 // software version of this library
|
|
|
|
#define MIN_PULSE_WIDTH 544 // the shortest pulse sent to a servo
|
|
#define MAX_PULSE_WIDTH 2400 // the longest pulse sent to a servo
|
|
#define DEFAULT_PULSE_WIDTH 1500 // default pulse width when servo is attached
|
|
#define REFRESH_INTERVAL 20000 // minumim time to refresh servos in microseconds
|
|
|
|
#define SERVOS_PER_TIMER 12 // the maximum number of servos controlled by one timer
|
|
#define MAX_SERVOS (_Nbr_16timers * SERVOS_PER_TIMER)
|
|
|
|
#define INVALID_SERVO 255 // flag indicating an invalid servo index
|
|
|
|
#define CURRENT_SEQUENCE_STOP 255 // used to indicate the current sequence is not used and sequence should stop
|
|
|
|
|
|
typedef struct {
|
|
uint8_t nbr :6 ; // a pin number from 0 to 63
|
|
uint8_t isActive :1 ; // true if this channel is enabled, pin not pulsed if false
|
|
} ServoPin_t ;
|
|
|
|
typedef struct {
|
|
ServoPin_t Pin;
|
|
unsigned int ticks;
|
|
unsigned int value; // Extension for external wait (Gill)
|
|
unsigned int target; // Extension for slowmove
|
|
uint8_t speed; // Extension for slowmove
|
|
} servo_t;
|
|
|
|
typedef struct {
|
|
uint8_t position;
|
|
uint8_t speed;
|
|
} servoSequencePoint;
|
|
|
|
class VarSpeedServo
|
|
{
|
|
public:
|
|
VarSpeedServo();
|
|
uint8_t attach(int pin); // attach the given pin to the next free channel, sets pinMode, returns channel number or 0 if failure
|
|
uint8_t attach(int pin, int min, int max); // as above but also sets min and max values for writes.
|
|
void detach();
|
|
void write(int value); // if value is < 200 its treated as an angle, otherwise as pulse width in microseconds
|
|
void write(int value, uint8_t speed); // Move to given position at reduced speed.
|
|
// speed=0 is identical to write, speed=1 slowest and speed=255 fastest.
|
|
// On the RC-Servos tested, speeds differences above 127 can't be noticed,
|
|
// because of the mechanical limits of the servo.
|
|
void write(int value, uint8_t speed, bool wait); // wait parameter causes call to block until move completes
|
|
void writeMicroseconds(int value); // Write pulse width in microseconds
|
|
void slowmove(int value, uint8_t speed);
|
|
void stop(); // stop the servo where it is
|
|
|
|
int read(); // returns current pulse width as an angle between 0 and 180 degrees
|
|
int readMicroseconds(); // returns current pulse width in microseconds for this servo (was read_us() in first release)
|
|
bool attached(); // return true if this servo is attached, otherwise false
|
|
|
|
uint8_t sequencePlay(servoSequencePoint sequenceIn[], uint8_t numPositions, bool loop, uint8_t startPos);
|
|
uint8_t sequencePlay(servoSequencePoint sequenceIn[], uint8_t numPositions); // play a looping sequence starting at position 0
|
|
void sequenceStop(); // stop movement
|
|
void wait(); // wait for movement to finish
|
|
bool isMoving(); // return true if servo is still moving
|
|
private:
|
|
uint8_t servoIndex; // index into the channel data for this servo
|
|
int8_t min; // minimum is this value times 4 added to MIN_PULSE_WIDTH
|
|
int8_t max; // maximum is this value times 4 added to MAX_PULSE_WIDTH
|
|
servoSequencePoint * curSequence; // for sequences
|
|
uint8_t curSeqPosition; // for sequences
|
|
|
|
};
|
|
|
|
#endif
|