Per-substrate transition history now survives restart. Each entry's
steady_clock timestamp is written as a system_clock-millis snapshot;
on replay the steady_clock time_point is reconstructed relative to
the current (steady_now, system_now) pair, so inter-event spacing
is preserved across restarts even if the FSM is in a different
process. Absolute wall-clock accuracy degrades by any NTP step
that happened between write and read; that's a documented caveat.
Record format goes v1 → v2. v1 (history-less) records still load,
just with empty history.
Test updates:
- the old "history is NOT journaled" test is REPLACED with one
that asserts every axis + event + label round-trips.
- hand-crafted v1 record on disk still loads (proves backwards
compat).
- 15 ms-spaced events restore with their spacing intact (±slop
for scheduler jitter).
Closes the "substrate history persistence" caveat from the post-#1-13
status writeup.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Closes the v1 caveat: the optional E40-0705 trailers on S16F11 —
recipe variables (RcpVar) and process parameters (ProcessParam),
each carrying a secs2::Item value of arbitrary type — now survive
restart.
Record format bumps to v2:
v2 header = v1 header
+ [u16 rcpvar_count][repeat: u16 name_len, name, u32 enc_len,
secs2::encode(value)]
+ [u16 ppparam_count][...same shape]
v1 records are still accepted by load_record_ (no extras come back).
Two new tests:
- round-trip mixed F4 / ASCII / U4 / nested-list values through
rcpvars + prprocessparams
- hand-crafted v1 record on disk still loads cleanly, just with
empty extras (proves backwards compat)
Closes the "PJ rcpvars / prprocessparams persistence" caveat from
the post-#1-13 status writeup.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
End-to-end guide for an equipment vendor integrating the library
into a real semiconductor tool:
1. Architecture: what the runtime provides vs what the application
contributes — three boundary classes (EquipmentDataModel,
Router, hsms::Connection).
2. 30-minute first connection: YAML + minimal main() + run.
3. Wiring real sensors to SVIDs.
4. Plugging the FSMs into the tool: EPT, carriers, substrates,
E40 PJ / E94 CJ, alarms, recoverable exceptions.
5. Persistence: enable_persistence(dir) per store, storage budget,
replay semantics, current caveats.
6. Monitoring + observability: connection lifecycle hooks,
state-change handlers, S9 protocol errors.
7. Recommended deployment layout (/opt/acme-secsgem/...).
8. Integration testing checklist.
9. When to extend the runtime.
10. The honest gap between "this stack runs" and "this is a
certified GEM tool".
Cross-referenced from COMPLIANCE.md §9 distinction (stack vs tool).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Real GEM sessions don't serialize requests — the host can have many
primaries outstanding, replies may arrive in any order, and both
peers can talk at once. Connection demuxes via system_bytes per
E37 §8.3; this commit pins the behaviour with four wire tests:
- 5 in-flight requests; equipment buffers all primaries before
replying — proves Connection holds the pending map correctly
even when no replies are coming.
- 7 pipelined primaries with synchronous in-handler replies;
every host callback fires with the correct function and stream.
- Bidirectional in-flight: host issues 3 primaries while equipment
issues 3 of its own; all 6 callbacks resolve with the right
replies.
- 100-burst sequential cycle; confirms the pending_requests_ map
doesn't leak entries (every reply delivered ⇒ map drained).
Closes#13 in the test-gap backlog.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
SEMI E5 allows identifier fields (DATAID, RPTID, VID, CEID, ALID,
EXID, OBJID, …) to be encoded as U1, U2, U4, or U8. Our parsers
route through any_unsigned_first<T> in messages_helpers.hpp. The
existing per-message round-trip tests prove the U4 path; this
commit adds the cross-width matrix that the interop incident with
secsgem-py demanded:
- as_u4_scalar accepts U1/U2/U4/U8 inputs for the same value
- as_u8_scalar accepts every narrower width
- as_u1_scalar accepts wider widths when the value fits
- as_u1_scalar / as_u2_scalar REJECT out-of-range values rather
than silently truncating
- codec round-trip preserves the format byte AND the value
- signed counterparts (as_i4_scalar) follow the same rule for I1/I2
If a future code-gen change hard-codes a single width on any
identifier field, the rejection case here breaks loudly.
Closes#12 in the test-gap backlog (renumbered: this is gap entry
"identifier wildcard matrix").
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Four new test cases:
* S3F19 verify with matching map → SlotMapVerifyAck::Accept and
CSMS lands in Read on the equipment side.
* S3F19 verify with disagreeing map → Mismatch ack and CSMS lands
in Mismatched.
* 4 LPs + 4 carriers, host verifies CAR-1 (mismatch) and CAR-3
(match) — only those two carriers move on the CSMS axis;
CAR-2/CAR-4 stay NotRead. Confirms per-carrier independence.
* Multi-LP E84 handshake sequencing (load then unload) round-trips
through Idle. Documents that the current E84StateMachine is
per-equipment, not per-port — a future per-port FSM would
update this test alongside.
Closes#11 in the test-gap backlog.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
test_gem300_scenario.cpp drives EquipmentDataModel in-memory. This
companion test does the same lifecycle through actual hsms::Connection
frames on a loopback socket pair:
S1F13/F14 establish comm
S3F17/F18 carrier action ProceedWithCarrier (E87)
S16F11/F12 process job create (E40)
S14F9/F10 control job create (E94)
S16F27/F28 CJSTART → CJ → Executing
S6F11 ControlJobExecuting CEID auto-emitted on transition
CJ → Completed via internal AllJobsComplete
EquipmentEmulator owns the data model + a passive Connection,
registers state-change handlers that synthesize S6F11/S16F9 on
transitions, and dispatches the inbound primaries above. HostEmulator
wraps the active Connection and captures everything the equipment
sends unsolicited.
This is the wire-level equivalent of the existing in-memory scenario,
which closes the gap between "FSM works" and "full GEM 300 stack
works on a wire".
Closes#10 in the test-gap backlog.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
FSM unit tests already verified state transitions fire the change
handler — but they don't prove the frame leaves the socket with the
right CEID and linked report payload. This commit wires a passive
equipment Connection to an EquipmentDataModel via a small emitter,
drives transitions, and asserts on what the host peer receives.
Six new tests:
EPT → Productive ⇒ S6F11(kCeidProductive) with the linked report
EPT (no subscription) ⇒ no S6F11 (proves disable gate)
PJ Queued→SettingUp ⇒ S16F9 PRJobAlert with PRJOBID + state byte
PJ alert_enabled=false ⇒ no S16F9 (per-PJ gate works)
CJ → Executing ⇒ S6F11(ControlJobExecuting) on the wire
Substrate StartProcessing ⇒ S6F11(SubstrateInProcess) on the wire
All use the generated parse_s6f11 / parse_s16f9 to decode the
incoming frame and assert against typed fields (CEID, PRJOBID, etc.)
rather than poking variant internals — that ties the test to the
schema-as-data rather than to wire byte offsets.
Closes#9 in the test-gap backlog.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Deterministic-seed fuzz coverage of the byte-decoding surface:
- secs2::decode on 2000 random buffers
- secs2::decode on every truncation of a real encoding + 500
one-byte flips of the full encoding
- hsms::Frame::decode on 1000 random payloads
- hsms::Header::decode on 2000 random 10-byte buffers
- secsi::Block::decode on 2000 random buffers
- secs2 encode/decode round-trip identity across a battery of every
Item factory (List, ASCII, Binary, Boolean, U1..U8, I1..I8, F4/F8,
nested List)
- oversize <A 3 length-bytes> length-prefix doesn't allocate GBs
- 64-level nested List round-trip doesn't blow the stack
Contract is binary: no crash, no UB. Each decoder is allowed to throw
or return whatever; we deliberately don't assert *what* result comes
back, only that control returns. Fixed PRNG seeds make any failure
reproducible from the CI log alone.
Closes#8 in the test-gap backlog.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
test_secsi.cpp covered T2 on the send side (retry) and a tick-based
back-to-back exchange. This commit fills in the rest of the timer
matrix at FSM level:
T1 in RecvBlock → abort, reason mentions "T1"
T1 outside RecvBlock → ignored
T2 in RecvEotSent → abort
T2 in RecvBlock → abort (mid-block stall)
T3 / T4 → FSM-level no-op (documented as upper-layer driven)
T2 contrast → send-side retries, recv-side aborts (same timer,
different recovery, both demonstrated in one test)
If a future commit moves T3 or T4 enforcement into the FSM, the
no-op test breaks loudly so protocol.hpp can be updated alongside.
Closes#7 in the test-gap backlog.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
S9F3/F5 are covered by test_s9_fallback (router path); S9F9/F11 by
test_hsms_timers (timer/over-length). This commit adds S9F7 wire-level
tests for the third path — a primary whose body fails secs2::decode.
Three new cases:
- hand-built primary with truncated <B> body provokes S9F7
carrying the original 10-byte MHEAD (sys + stream + function)
- emission is non-fatal: the next well-formed primary still routes
to the registered handler
- data-while-NOT-SELECTED still echoes Reject(EntityNotSelected)
(sanity copy of the test_hsms_connection case so the "what does
the equipment say when a peer sends garbage" family lives together)
Closes#6 in the test-gap backlog.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Real-socket tests for the timer family in E37 §10 — these replace
the "the timer fires somewhere" implicit assumption with
end-to-end observations on a loopback pair:
T3: send_request that gets no reply emits S9F9 with the original
MHEAD echoed in the body and surfaces Timeout to the caller.
T6: active mode whose Select.req goes unanswered self-closes
with a "T6 timeout on Select" reason.
T7: passive mode that never receives Select.req self-closes
with a "T7 not-selected timeout" reason.
T8: peer sends only the 4-byte length prefix; T8 expires mid-read
and closes with "T8 intercharacter timeout".
Plus S9F11 emission for an over-length frame (length prefix of
1 GiB+1) — body's <B 10> echoes the offending bytes verbatim.
Per-test timer profiles (only the timer under test is short, the
rest are 5s) so the FSM isn't racing against unrelated timers.
Closes#5 in the test-gap backlog.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Per-EXID binary record (.ex), magic + version + atomic .tmp+rename.
Records full E5 §9 lifecycle: state, EXID, EXTYPE, EXMESSAGE, and
the candidate EXRECVRA list.
Cleared exceptions are terminal — the FSM transitions through
Cleared remove the in-memory entry AND delete the journal file
(matching the existing in-memory semantics). Recovering /
RecoverFailed states survive restart: the application can decide
on replay whether to retry recovery or abort.
Five new tests cover post+replay, Recovering-survives-restart,
autonomous-clear cleanup, RecoverFailed retry post-restart, and
corrupt-record drop.
This completes #12 in the test-gap backlog (persistence for the four
in-memory stores beyond Spool).
Closes#4 in the test-gap backlog.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Per-job binary record (.pj / .cj) with magic+version, atomic
.tmp+rename. PJ store additionally writes an order.idx index file
that preserves HOQ-aware queue position across restarts.
Rcpvars / prprocessparams (secs2::Item variants) are intentionally
out of scope for v1 — they're optional E40 trailers and need a body
codec round-trip; callers re-populate via set_e40_extras() after
restart.
Five new tests cover full lifecycle replay (Processing mid-run +
HOQ-reordered queue), dequeue-deletes-file, corrupt-record drop,
CJ state + PJ-list replay, and CJ remove cleanup.
Closes#3 in the test-gap backlog.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Same pattern as carriers: per-substrate binary record (.sub) with
atomic .tmp+rename, replay on enable, delete on remove. Records
current state across all three E90 axes (location / processing /
ID-status), plus substid / carrierid / slot / free-form location
label. History is deliberately NOT journaled — it's an in-memory
ring buffer and rebuilding from replayed state would mislead.
Five new tests cover full-axis replay, every terminal processing
state, remove-deletes-journal, corrupt-record drop, and the
history-is-transient invariant.
Closes#2 in the test-gap backlog.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Mirrors SpoolStore: per-record file with atomic .tmp+rename, magic+
version-prefixed binary layout, replay on enable, delete on remove.
FSMs gain a restore_state() that bypasses the transition table and
handlers since a replay isn't a transition.
Six new tests cover write+restart+replay across every CIDS/CSMS/CAS
axis, remove-deletes-journal, malformed-record drop-not-poison, and
the persistence-disabled no-op path.
Closes#1 in the test-gap backlog.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
A host couldn't drive the new messages through the HostHandler class —
only the server side knew how to dispatch them. Adds six new senders
plus a unit test that walks each through a real loopback connection:
* send_legacy_remote_command -> S2F21
* send_event_report_request -> S6F15
* send_individual_report_request -> S6F19
* send_annotated_report_request -> S6F21
* send_pp_load_inquire -> S7F1
* send_delete_pp -> S7F17
Suite: 296 cases / 1571 assertions.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Adds round-trip checks for the SECS-II messages added in the AA
catalog-growth commit but never cross-validated against secsgem-py:
* S2F21/F22 — legacy remote command (no params). secsgem-py's
stock S2F21 sends with W=0; we register a W=1 override so the
transaction awaits our S2F22 reply. Also widens CMDA's allowed
types to include Binary (secsgem-py 0.3.0 declares CMDA as
Dynamic[U1, I1] only; SEMI E5 §10.18 says Binary, and our server
emits it that way).
* S6F15/F16 — event-report request by CEID.
* S6F19/F20 — individual report request by RPTID.
* S6F21/F22 — annotated individual report request.
* S7F1/F2 — PP load inquire.
* S7F17/F18 — PP delete.
Suite is now 32 named host-vs-server checks — all green in three
consecutive runs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Adds a docker-compose service `server-spool` that runs secs_server
with --spool-dir pointed at a named volume. Two-phase Python
harness (interop/spool_persistence_test.py):
1. Enqueue phase: force-spool one S6F11(CEID=300) via the
SPOOL_ON / START / SPOOL_OFF RCMD trio, then disconnect.
2. Driver runs `docker compose restart server-spool` between
the phases — the named volume preserves the journal files.
3. Drain phase: reconnect, send S6F23(Transmit), verify the
replayed S6F11 carries CEID 300.
Surfaces a real interop bug along the way: secsgem-py 0.3.0 encodes
RSDC (and other "single-byte status" fields) as <U1>, while SEMI E5
spells them as <B>. Our `as_binary_first` was strict on Binary; now
accepts either (the byte semantics are identical, and the leniency is
symmetric with the U-type widening from the first interop commit).
Result: enqueue → docker restart → drain returns CEID 300 cleanly.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Closes the test gap for messages I added but whose reply parsers were
only generated, never exercised:
* S6F8 — full nested DATAID/CEID/DS/DV structure.
* S12F14 — row-format map reply (RSINF tuples).
* S12F16 — array-format map reply.
* S12F18 — coordinate-format map reply.
Suite: 295 cases / 1545 assertions.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Cross-validates the GEM 300 streams secsgem-py 0.3.0 doesn't ship
(S3 carriers, S14 control jobs, S16 process jobs) by minting custom
`SecsStreamFunction` subclasses on the fly and registering the
matching `DataItem` definitions (CARRIERID, CTLJOBID, PRJOBID, PRCMD,
CTLJOBCMD, MF, …) with `secsgem.secs.data_items`.
Drives the C++ passive server through:
* S3F17/F18 (E87 carrier action) — server replies CarrierIDUnknown
for the unregistered carrier.
* S16F5/F6 (E40 PRJobCommand) — server returns InvalidObject
for the nonexistent PJ.
* S16F27/F28 (E94 CJobCommand) — server cascades CJSTART.
Scope cut: S16F11 full-body and S14F9 (both have variable-length
nested lists with named scalar elements) hit a quirk of secsgem-py's
SFDL tokenizer where `< L name > <SCALAR> >` parses as a fixed-1
list, not a variable-length list of SCALARs. The full-body S16F11
is already round-tripped by the C++ unit tests (and via secsgem-py's
host driver in `host_vs_cpp_server.py`), so the raw harness focuses
on the no-variable-list messages where the SFDL grammar cooperates.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
The doc was last updated when only E40 + E94 were in tree. Brings it
up to date with everything actually implemented:
* New §4a–§4k tables for each GEM 300 standard: E40, E94, E87, E90,
E116, E120, E148, E157, E84, E5 §13 wafer maps, and the exception
recovery extension (S5F13–F18 + ExceptionStateMachine).
* Refreshed message coverage matrix to all 149 catalog entries
(added S1F23/F24, S2F21/F22, S6F5–F8/F15–F22, S7F1/F2/F17/F18,
S10F3/F4, S12F9–F18).
* Updated test count to 291 cases / 1515 assertions.
* New §7 documents the secsgem-py interop harness (24 host-side
checks + raw-GEM300 round-trip).
* §8 trimmed: persistent spool is no longer "out of scope" (CC1
landed); E40/E87/E90 removed from "Layer 5 follow-on" list since
they're done.
* §9 honesty pass — every GEM 300 standard in scope now implemented
end-to-end; the remaining gap is third-party RTS certification +
per-vendor application wiring.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Adds opt-in disk persistence to SpoolStore. `enable_persistence(dir)`
turns every enqueue into a single `<seq>.spool` file alongside the
in-memory queue; drain and clear delete the matching files; restart
replays the directory sorted by seq.
Writes are atomic: serialize the message via the SECS-II codec, write
to `.tmp`, then `std::filesystem::rename` to the final name. Malformed
records are dropped silently so a single bad file can't poison the
whole spool.
`secs_server --spool-dir <path>` enables persistence at startup.
Without the flag the behaviour is identical to before (in-memory only).
Two new tests: enqueue → restart → replay → drain restores the wire
order, and clear deletes the journal files.
Test suite: 291 cases / 1515 assertions.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Replaces the simplified <L,3 PRJOBID PPID MTRLOUTSPEC> demo body with
the full SEMI E40-0705 §10.2 shape:
<L,5 PRJOBID MF PRRECIPEMETHOD
<L,2 PPID <L,n <L,2 RCPPARNM RCPPARVAL>>>
<L,n MTRLOUTSPEC>
<L,n <L,2 PARAMNAME PARAMVAL>>>
ProcessJob now carries the extra fields (MaterialFlag, ProcessRecipeMethod,
RcpVar[], ProcessParam[]) so a tool's recipe engine can later consume
the recipe-variable overrides and per-job process parameters. Server
S16F11 dispatch populates them via the new ProcessJobStore::set_e40_extras
helper after a successful create.
MaterialFlag + ProcessRecipeMethod enums live in their own tiny header
(`e40_constants.hpp`) so process_jobs.hpp (the store) can use them
without dragging in messages_helpers.hpp (which would create a circular
include via data_model.hpp).
The simplified 3-arg HostHandler::send_create_process_job convenience
remains; it constructs a sensible-default PRJobCreateRequest internally.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Adds the SECS-II messages secsgem-py 0.3.0 ships but our C++ catalog
didn't have, plus the alternative wafer-map formats from E5 §13.
None of these were strictly required for GEM core compliance, but
they're the messages a host might send to a conformant equipment.
* S7F1/F2 — Process Program Load Inquire / Grant. Equipment-side
space-and-policy check before a host commits to S7F3.
* S7F17/F18 — Delete Process Program. Empty list = delete-all.
* S6F5/F6 — Multi-block Data Send Inquire / Grant (with MultiBlockGrant
enum: Ok/Busy/NoSpace/DuplicateMsg/BadMsg).
* S6F7/F8 — Data Transfer Request / Send. Host pulls a DATAID;
equipment replies with the nested DS/DV structure.
* S6F15/F16 — Event Report Request (host-initiated). Reply mirrors
the unsolicited S6F11.
* S6F19/F20 — Individual Report Request (RPTID -> values).
* S6F21/F22 — Annotated Individual Report Request (RPTID -> (VID, value)).
* S2F21/F22 — Legacy Remote Command (no parameter list). Delegates
to the same HostCommandRegistry as S2F41.
* S12F9/F10 — Map Data Send (array format, MAPFT=1).
* S12F11/F12 — Map Data Send (coordinate format, MAPFT=2).
* S12F13/F14, F15/F16, F17/F18 — Map Data Request variants for the
row, array, and coordinate formats.
11 new round-trip tests; suite at 289 cases / 1495 assertions.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Adds a Docker-based interop harness that drives the C++ server with
secsgem-py 0.3.0 as the active host and probes a secsgem-py-passive
equipment from a minimal C++ active client. Surfaces and fixes four
interoperability bugs uncovered by cross-testing:
* SEMI E5 identifier formatcodes are a U1|U2|U4|U8 wildcard;
secsgem-py picks the narrowest fitting width while our parsers
only accepted U4. `as_uN_scalar` / `as_iN_scalar` now accept
any unsigned/signed width and range-check the downcast.
* PPBODY (S7F3/F6) is "ASCII | Binary | List" per the spec;
secsgem-py defaults to ASCII. Added BINARY_OR_ASCII codegen
item type with `as_text_or_binary` accessor.
* S1F23/F24 Collection Event Namelist was unimplemented; added
schema + `vids_for(ceid)` accessor on EventReportSubscriptions
plus the dispatch handler.
* S10F1 was registered as a host->equipment handler, but per
SEMI E5 §12 S10F1 is equipment->host; S10F3 is the actual
host->equipment Terminal Display Single. Added an S10F3
handler alongside (we keep S10F1 too for backward compat).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
The biggest single gap I called out in the GEM300 audit — closed.
E84 is the digital handshake between AMHS (Automated Material
Handling System) and the equipment for carrier load/unload. Unlike
the rest of GEM300, this isn't SECS messaging; it's a fixed set of
ten parallel boolean wires that follow a strict sequencing protocol
(E84-0710 §6.3).
Adds:
E84Signal enum CS_0/CS_1/VALID/TR_REQ/BUSY/COMPT/L_REQ/U_REQ/
READY/ES
E84SignalSet 10-bit bitmap with bool get/set
E84State Idle / CarrierPresent / ValidAsserted /
LoadReady / UnloadReady / Transferring /
Complete / EmergencyStop
E84StateMachine re-evaluates state on every signal change,
observable via set_state_change_handler
Joins EquipmentDataModel as `e84` (top-level — there's one per tool,
not per port). ES (emergency stop) dominates regardless of other
signals; COMPT and BUSY override the VALID-handshake states. Same
FSM drives real opto-isolated I/O lines (when wired through an
asio digital input adapter) and the back-to-back test simulation.
Six test cases cover the full load handshake trace (six transitions,
including the transient LoadReady-after-BUSY-drops state), the
unload variant via U_REQ, ES dominance + recovery, reset(), and
no-op suppression for idempotent signal writes.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Extends the existing Clock with the metrics a host needs to gate
time-sensitive data against the equipment's sync state (E148 §6.3):
offset_seconds() current applied offset vs system clock
last_drift_seconds() signed drift observed at the most recent sync
sync_count() how many successful syncs have happened
sync_quality() Synchronized (|drift|<=1s) /
Drifting (<=60s) / Unsynchronized (>60s or
never synced)
The thresholds are tuneable per call; the defaults match typical fab
practice but the application can pass tighter bounds for tracelog-
sensitive flows. set_time_string() now snapshots the apparent delta
between the previously-applied offset and the new one as
last_drift_seconds_ at the moment of resync; no background timer.
Three new test cases cover the initial Unsynchronized state, a large
forward drift registering as Unsynchronized, and a same-value resync
landing as Synchronized.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
The catalog had S14F9/F10 / F11/F12 specialized for E94 ControlJob;
this commit adds the generic E14 attribute access pair, the most-
queried half of the E39 surface area, backed by the CemObjectStore.
S14F1 / F2 GetAttr — OBJSPEC + OBJTYPE + ATTRID list ->
(ATTRID, VALUE) pairs + OBJACK
S14F3 / F4 SetAttr — same addressing, applies ATTRID/VALUE pairs,
reply echoes stored values + OBJACK
Server dispatches both into the CemObjectStore added in tranche G.
OBJTYPE validation is case-sensitive against the CemObjectType name
(Equipment / Subsystem / IODevice / Module / MaterialLocation).
Unknown objects return Denied_UnknownObject; type mismatches return
Denied_InvalidAttribute.
The shared AttrValue struct is declared external_struct: true on
F3/F4 so both directions share the same C++ type.
Two round-trip tests cover both pairs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Closes the two E40 bulk/control gaps the COMPLIANCE doc had flagged
as out-of-scope:
S16F7 / F8 PRJobMonitor — host enables/disables S16F9 alerts
per PJ. PRALERT bit 7 is the enable flag (matches the
ALED convention from S5F3). Server dispatches into the
existing set_alert() store API.
S16F15 / F16 PRJobCreateMultiple — bulk create variant. Host posts
a list of (PRJOBID, PPID, MTRLOUTSPEC) entries; the
equipment processes them in order and returns a
per-PJ HCACK list so the host can identify which
subset failed. Same validators as S16F11.
Catalog now has three new structs: PRJobMonitorEntry,
PRJobCreateEntry, PRJobCreateMultiResult. Two round-trip tests cover
the new wire shapes; server-side correctness is exercised through the
existing PJ store invariants (dedup, validator) which both new paths
delegate to.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Closes the slot-map verification gap I called out:
S3F19 / F20 host -> equip: verify expected slot map against what
the equipment has scanned. Equipment compares element-
wise; on match drives CSMS NotRead -> Read and replies
SVACK=Accept; on mismatch drives CSMS -> Mismatched and
replies SVACK=Mismatch.
S3F21 / F22 equip -> host: equipment-initiated slot map report
(typically pushed after CARRIERID is confirmed).
New SVACK enum: SlotMapVerifyAck { Accept, Mismatch, CarrierUnknown,
Error }. Server dispatch on S3F19 wires the actual CSMS transition
through the CarrierStore from D3.
Two round-trip tests cover both pairs; the FSM-driving behaviour is
exercised through the in-process tests because secs_server.cpp is
the dispatch entry point (no separate integration test needed beyond
the wire round-trip).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Adds the substrate-ID verification FSM that E90 §6.4.6 calls for:
NotConfirmed initial; equipment hasn't read the ID yet
WaitingForHost ID has been read; awaiting host accept/reject
Confirmed host confirmed (or force-bound)
Mismatched host rejected — recoverable via Bind
Events:
Read NotConfirmed -> WaitingForHost
Confirm WaitingForHost -> Confirmed
Mismatch WaitingForHost -> Mismatched
Bind any -> Confirmed (force-bind)
Reset any -> NotConfirmed
Wire-byte values pinned via static_assert. The third axis is now
exposed on SubstrateStateMachine alongside location_state() and
processing_state(); set_id_handler() observes transitions. Existing
two-axis API is unchanged.
4 new test cases cover the happy path, Mismatch+Bind recovery, Reset
from any state, and same-state event handler suppression.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Each Substrate now retains an append-only history of state transitions
(both location and processing axes), the triggering event captured as
a std::variant<SubstrateEvent, SubstrateProcessingEvent>, the location
label at the time, and a steady_clock timestamp.
E90 §6.6 requires the equipment to be able to report a wafer's
processing history — typically queried via S6F11 batched reports or
SVID reads. This commit lays the runtime substrate; wire query
plumbing is the natural follow-up.
set_history_limit(n) caps per-substrate retention (default 256, 0 =
unbounded). Oldest entries are dropped when the cap is reached;
vector-erase is fine at this scale (typical wafer lifecycle is a few
dozen transitions).
Two new test cases cover the recording invariants (every fire results
in one history entry on the right axis) and history_limit eviction.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
EptStateMachine now retains per-state cumulative dwell time so the
host can read it as SVIDs. The implementation is zero-overhead while
the FSM is idle (no timers, no background work) — on every transition
we add the prior state's dwell to its bucket and reset the entered_
timestamp. Live dwell in the current state is included in
accumulated() via a now-vs-entered_ delta at read time.
New public API:
accumulated(EptState) per-state cumulative ms (incl. live dwell)
total_elapsed() denominator for utilization ratios
reset_history() S2F43-style history clear
This closes the gap I called out: previously we emitted CEIDs on
transition but didn't accumulate the bucket the host actually queries
for utilization metrics. Wiring these into specific SVIDs is the
application's job (equipment.yaml declares SVIDs against any read
callable); the runtime data is now there.
4 new test cases cover accumulation, live-dwell inclusion, and reset.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
The S9F3/F5 fallback was previously inlined in apps/secs_server.cpp;
this commit lifts it onto Router as a template helper and adds two
focused tests asserting the wire behaviour against a real back-to-
back HSMS Connection pair.
template <typename EmitFn, typename HeaderProvider>
std::optional<Message> dispatch_with_s9(emit, header, msg);
The helper does the has_handler / has_handler_for_stream check and
calls the supplied emit function with S9F3 (unknown stream) or S9F5
(unknown function in known stream). The header_provider returns the
optional MHEAD bytes — keeping the helper free of any direct
Connection coupling.
Tests:
- SUT registered only for S1F1; peer sends S1F5 -> SUT replies
S9F5 to the peer.
- SUT registered only for S1F1; peer sends S7F19 -> SUT replies
S9F3 to the peer.
Closes Tranche I — SML parser and the auto-S9F* fallback closeout
both verified end-to-end.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Adds parse_sml(text) -> Item / try_parse_sml(text) -> optional<Item>
in secs2/sml.hpp. Round-trips with the existing to_sml() emitter for
every Item shape the codec produces: lists with nesting, ASCII / JIS8,
Binary (decimal and 0xHH literals), Boolean (T/F or 1/0, scalar and
multi-element), U1-U8 / I1-I8 / F4 / F8 vectors, and the optional
`[n]` count syntax (accepted but not enforced).
The parser is whitespace-insensitive outside quoted strings and uses
a small Cursor type for read_word / read_quoted / skip_ws. Numeric
literals go through strtoul/strtoll/strtod so SML can carry hex,
octal, and decimal interchangeably (the emitter writes hex for Binary
and decimal everywhere else).
11 test cases cover the full round-trip surface, the whitespace
invariant, unknown-tag rejection, the try_parse error-swallowing
variant, and the optional `[n]` count.
secsgem-py has secs/sml.py for the same purpose; this brings the C++
port to parity on the tooling side.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Adds the canonical E157 collection-event identifiers in the 1570+ block:
1570 ModuleProcessStateChange (generic; fired on any transition)
1571 ModuleNotExecuting
1572 ModuleGeneralExecuting
1573 ModuleStepExecuting
1574 ModuleStepCompleted
Server installs a state-change handler that fires both the generic
CEID and the state-specific one for each transition. Hosts that
prefer "wake me on any module change and I'll fan it out myself" can
subscribe to only the generic CEID; hosts that want narrower
notifications subscribe to specific states.
Closes Tranche H — E157 Module Process Tracking end-to-end (FSM +
Store + CEIDs + server emission).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Per-module process-tracking state machine. An E157 instance models a
single recipe step at a single module, with the canonical lifecycle:
NotExecuting -> GeneralExecuting (StartGeneral)
-> StepExecuting (StartStep)
-> StepCompleted (CompleteStep)
Plus universal escape hatches: Reset returns any state to
NotExecuting; Abort terminates from any state to StepCompleted.
ModuleStore wraps the FSM with the now-standard pattern:
- non-movable (this-capture lambdas)
- per-module bind() carries current_substid + recipe_step
- fire(module_id, event) delegates to the FSM
- set_state_change_handler observes every transition with module_id
Joins EquipmentDataModel. 5 test cases cover happy path, Reset from
each interior state, Abort, store-level create dedup + bind, and the
multi-module change handler keying.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Hierarchical object tree for equipment self-description. Each object
carries a CemObjectType (Equipment / Subsystem / IODevice / Module /
MaterialLocation / Other), an optional parent_objid, and a flat
attribute map keyed by name (the wire shape S14F1 / F3 returns).
Operations covered:
add(CemObject) - dedup'd, validates parent exists
get / has - lookup by objid
get_attr / set_attr - E14 GetAttr / SetAttr semantics
children(parent) - tree traversal; empty parent = roots
The flat-map representation matches how E14 ObjectService traffic
addresses nodes (by OBJSPEC string). Wiring S14F1/F2 GetAttr and
S14F3/F4 SetAttr to this store is a downstream commit; the data model
is what was missing.
Joins EquipmentDataModel alongside the other top-level stores. Three
test cases cover hierarchical add+dedup, children() traversal, and
get/set/missing attribute semantics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
EquipmentDataModel now carries an EptStateMachine as a value member
alongside the other top-level state machines. Server installs a
state-change handler that maps every EPT transition to a CEID emission
through the existing emit_event path:
1100 NonScheduledTime 1103 Engineering
1101 ScheduledDowntime 1104 Standby
1102 UnscheduledDowntime 1105 Productive
CEIDs land in the 1100+ block to keep clear of the demo equipment.yaml
(100s/200s/400s) and E90 (900s). Log lines include the dwell time of
the previous state so trace-level diagnostics show utilization without
extra tooling.
Application code drives transitions by calling model->ept.on_event(...);
the existing event-report machinery (subscription state, S6F11
batching, spool) gates wire emission so EPT events spool on offline
hosts like every other CEID.
Closes Tranche F — E116 Equipment Performance Tracking end-to-end.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Adds the six E116-0712 §6.2 buckets for classifying equipment time:
NonScheduledTime (0) not scheduled to operate
ScheduledDowntime (1) planned maintenance window
UnscheduledDowntime (2) faults / unplanned stoppage
Engineering (3) engineering / qualification time
Standby (4) idle but available
Productive (5) actively producing
Wire-byte values pinned via static_assert to E116 §10.3.
The FSM is a classifier rather than a strict lifecycle — every
(state, event) pair is legal — but it remains data-driven through the
shared CarrierTransitionTable template so the default cross-product is
expressible declaratively.
The state-change handler also surfaces dwell time (how long the
previous state was held) computed off std::chrono::steady_clock, so
accounting code can compute MTBF / availability / utilization from a
single source without maintaining a parallel timestamp log.
4 test cases cover the initial state, every event firing, dwell-time
reporting, and the no-op same-state event (no handler call).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Adds a typed substrate-event callback to HostHandler that decodes the
canonical E90 CEIDs from incoming S6F11 messages into the matching
SubstrateState / SubstrateProcessingState enum values. Host
applications now get strongly-typed substrate observability without
having to maintain their own CEID-to-state lookup.
using SubstrateEventHandler =
std::function<void(uint32_t ceid, SubstrateState location,
SubstrateProcessingState processing)>;
void set_substrate_event_handler(SubstrateEventHandler);
Axes not addressed by a given CEID stay at NoState — the handler
distinguishes "this CEID updates the location axis" from "this CEID
updates the processing axis" so the host can keep its own per-
substrate FSM in sync.
Closes Tranche E — E90 Substrate Tracking end-to-end (FSM + Store +
CEIDs + server emission + host observer).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Adds the canonical E90-0716 §6.5 collection-event identifiers as a
single header of inline constants (gem/e90_constants.hpp) keyed off
SubstrateState / SubstrateProcessingState transitions:
901 AtSource 910 NeedsProcessing
902 AtWork 911 InProcess
903 AtDestination 912 Processed
913 Aborted
914 Stopped
915 Rejected
916 Lost
917 Skipped
Values use the 901+ block to avoid collision with the demo CEIDs in
data/equipment.yaml (100s/200s/400s).
Server installs location + processing change handlers on
model->substrates that map every transition to emit_event() with the
matching CEID. The existing event-report machinery (subscription
state, S6F11 batching, spool) gates the actual wire emission, so this
plays nicely with hosts that subscribe to only a subset of substrate
events.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Hooks the CarrierStore + LoadPortStore from D3 onto the wire:
S3F17 CarrierAction:
ProceedWithCarrier -> CarrierIDEvent::ProceedWithCarrier
CancelCarrier -> CarrierIDEvent::CancelCarrier
BindCarrierID -> CarrierIDEvent::Bind
unknown action -> CAACK=CarrierActionInvalid
unknown carrier -> CAACK=CarrierIDUnknown
S3F25 CarrierTransfer:
fires source.StartUnloading + target.StartLoading transfer
events, updates Carrier::port_id, returns CAACK=Accept.
S3F27 CancelCarrier:
fires CIDS CancelCarrier + CAS Cancel against the carrier.
The state-change handlers wired into the stores in D3 are the right
place to emit S6F11 CEIDs for carrier-events; that hookup is left for
a follow-up commit (it depends on the equipment.yaml CEID catalog,
which doesn't yet enumerate E87 events).
Closes Tranche D — E87 Carrier Management end-to-end (FSMs + wire +
stores + dispatch).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Adds the Carrier Management wire surface that drives the FSMs from D1:
S3F17 / S3F18 CarrierAction (host issues ProceedWithCarrier /
CancelCarrier / BindCarrierID / etc.; CommandParameter
list is reused from S2F41).
S3F23 / S3F24 PortGroupChangeReport (equipment notifies host of port
group composition changes).
S3F25 / S3F26 CarrierTransfer (host instructs source -> target port
transfer).
S3F27 / S3F28 CancelCarrier (host cancels an outstanding carrier op).
Two new ack enums in messages_helpers.hpp:
CarrierActionAck — CAACK byte; covers the common error responses
(CarrierIDUnknown, Inaccessible, ActionInProgress).
PortGroupAck — PGACK byte (Accept / Error).
Round-trip tests for all four pairs. Server-side dispatch + the
CarrierStore + LoadPortStore that the FSMs key into land in D3/D4.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Per-carrier triple FSM: CIDS (id verification), CSMS (slot-map), CAS
(access). Per-port triple FSM: LPTS (transfer), LRS (reservation), LAS
(association). Wire-byte enum values pinned via static_assert to match
E87-0716 §10.3.
CarrierStateMachine combines the three carrier-side FSMs because they
are independent but always observed together; same for LoadPortState-
Machine. Generic CarrierTransitionTable<State, Event> template is
reused across all six tables — same row shape as the PJ/CJ/Exception
tables that already exist.
Default tables cover the spec's documented transitions:
CIDS: NotConfirmed <-> Confirmed/Mismatched/Unknown, Cancel returns
to NotConfirmed from any state, Bind force-confirms.
CSMS: NotRead -> Read -> {Mismatched, Reset}.
CAS: NotAccessed -> InAccess -> Complete (terminal).
LPTS: OutOfService <-> InService <-> Loading/Unloading.
LRS / LAS: simple boolean toggle pairs.
15 test cases assert the happy-path lifecycles, cross-state cancels,
and that change handlers fire only on real transitions (Read in
NotConfirmed is a no-op, not a handler call).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
ALCD's lower 7 bits are a bitmap of category flags per E5 §10.3 and
E30 §6.13; a single alarm may carry multiple categories at once
(e.g. an irrecoverable equipment-safety fault is 0x10 | 0x02).
Adds:
enum class AlarmSeverity : uint8_t
PersonalSafety EquipmentSafety ParameterError ParameterWarning
Irrecoverable EquipmentStatus Attention
has_severity(alcd, bit), severity_bits(alcd)
Alarm::has(bit), Alarm::is_safety()
constexpr severity_mask = 0x7F
Tests cover single-category alarms, multi-category combos, and that
the bit-7 SET/CLEAR flag is correctly excluded from category bits.
Closes Tranche C (E5 alarm/exception state model).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
raphael